Telit Wireless Solutions ME910G1 - Page 399

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 399 of 545 2020-04-15
AT#ST=?
Test command reports the range for parameter <connId>.
Examples for single socket and for all sockets
•
For single socket
AT#ST=3
#ST: 3,2,1
Socket 3 is an UDP dialer
•
for all socket
AT#ST
#ST: 1,0,0
#ST: 2,0,0
#ST: 3,2,1
#ST: 4,2,2
#ST: 5,1,1
...
Socket 1 is closed.
Socket 2 is closed.
Socket 3 is an UDP dialer
Socket 4 is an UDP listener
Socket 5 is a TCP dialer