Telit Wireless Solutions ME910G1 - AT&V - Display some Configuration and Profile

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 36 of 545 2020-04-15
3.1.2.9. AT&V - Display some Configuration and Profile
The command displays some of the basic modem configuration settings and parameters
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT&V
Execution command returns some of the basic modem configuration settings and parameters,
one for each row, in the format:
setting/parameter : value
The row of information about CTS (C106) OPTIONS is in the output of &V for
compatibility reasons and represents only a dummy value.
Example of returned values.
•
AT&V
COMMAND ECHO
:
E1=YES
RESULT MESSAGES
:
Q0=YES
VERBOSE MESSAGES
:
V1=YES
EXTENDED MESSAGES
:
X1=YES
LINE SPEED
:
F0=autodetect
CONSTANT DTE SPEED
:
YES
FLOW CONTROL OPTIONS
:
&K3=HW bidirect.
ERROR CORRECTION MODE
:
RLP
CTS (C106) OPTIONS
:
&B2=OFF while disc.
DSR (C107) OPTIONS
:
&S3=PHONE ready->ON
DTR (C108) OPTIONS
:
&D0=ignored
DCD (C109) OPTIONS
:
&C1=follows carrier
RI (C125) OPTIONS
:
\R1=OFF dur. off-hk
C108/1 OPERATION
:
&D0=NO
POWER SAVING ON DTR
:
+CFUN:1=NO
DEFAULT PROFILE
:
&Y0=user profile 1
OK