EasyManua.ls Logo

Telit Wireless Solutions ME910G1 - AT#SKIPESC - Skip Escape Sequence

Telit Wireless Solutions ME910G1
545 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 106 of 545 2020-04-15
3.1.4.12. AT#SKIPESC - Skip Escape Sequence
This command enables/disables skipping the escape sequence.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Specific profile
No
-
2
AT#SKIPESC=[<mode>]
Set command enables/disables skipping the escape sequence (+++) while transmitting during a
data connection.
Parameter:
Name
Type
Default
Description
<mode>
integer
0
enable/disable skipping the escape sequence (+++)
Values:
0
:
does not skip the escape sequence; its transmission is enabled.
1
:
skips the escape sequence; its transmission is not enabled.
In FTP connection the escape sequence is not transmitted, regardless of the command
setting.
AT#SKIPESC?
Read command returns the current value of the parameter <mode> in the format:
#SKIPESC: <mode>
AT#SKIPESC=?
Test command returns the supported values of parameter <mode>.

Table of Contents

Other manuals for Telit Wireless Solutions ME910G1

Related product manuals