Telit Wireless Solutions ME910G1 - Modulation & Compression Control; AT%E - Line Quality and Auto Retrain

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 112 of 545 2020-04-15
3.1.6. Modulation & Compression Control
3.1.6.1. AT%E - Line Quality and Auto Retrain
This command is used for line quality monitoring and auto retrain or fall back/fall forward.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT%E[<n>]
Execution command has no effect and is included only for backward compatibility with landline
modems.
Parameter:
Name
Type
Default
Description
<n>
integer
-
this parameter is not really used, and it is present only for
backward compatibility
If <n> parameter is not specified, the default value is considered