EasyManua.ls Logo

Telit Wireless Solutions ME910G1 - AT+CPWD - Change Facility Password

Telit Wireless Solutions ME910G1
545 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 121 of 545 2020-04-15
3.2.6. AT+CPWD - Change Facility Password
This command changes the password for the facility lock function defined by command Facility Lock +CLCK
command.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Other
Yes
180 s
2
AT+CPWD=<fac>,<oldpwd>,<newpwd>
Execution command changes the password for the facility lock function defined by command
Facility Lock +CLCK command.
Parameters:
Name
Type
Default
Description
<fac>
string
N/A
facility lock function.
Values:
"SC"
:
SIM (PIN request)
"P2"
:
SIM PIN2
<oldpwd>
string
-
it shall be the same as password specified for the facility from
the ME user interface or with command +CPWD.
<newpwd>
string
-
new password.
Parameter <oldpwd> is the old password while <newpwd> is the new one.
AT+CPWD=?
Test command returns a list of pairs (<fac>,<pwdlength>) which represents the available facilities
and the maximum length of their password (<pwdlength>).

Table of Contents

Other manuals for Telit Wireless Solutions ME910G1

Related product manuals