Telit Wireless Solutions ME910G1 - AT#PPPCFG - PPP Configuration

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 349 of 545 2020-04-15
3.12.11. AT#PPPCFG - PPP Configuration
This command configures the PPP mode.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#PPPCFG=<mode>
Set command sets the active/passive PPP mode
Parameter:
Name
Type
Default
Description
<mode>
integer
1
sets PPP mode
Values:
0
:
passive mode
1
:
active mode
AT#PPPCFG?
Read command returns the current <mode>, in the format:
#PPPCFG: <mode>
AT#PPPCFG=?
Test command returns the range of available values for parameters <mode> .