Telit Wireless Solutions ME910G1 - AT#FTPGET - FTP Get Command

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 427 of 545 2020-04-15
3.14.7. AT#FTPGET - FTP Get Command
This command executes the FTP Get function during an FTP connection.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#FTPGET=[<filename>]
Execution command opens a data connection and starts getting a file from the FTP server. If the
data connection succeeds a CONNECT indication is sent and the file is received on the serial port.
Parameter:
Name
Type
Default
Description
<filename>
string
-
file name to get from server.
The command causes an ERROR result code to be returned in case no FTP connection
has been opened yet.
Command closure should always be handled by application. To avoid download stall
situations a timeout should be implemented by the application.
AT#FTPGET=?
Test command returns the OK result code.