Telit Wireless Solutions ME910G1 - Smtp; AT#ESMTP - E-Mail SMTP Server

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 442 of 545 2020-04-15
SMTP
3.15.1. AT#ESMTP - E-mail SMTP Server
This command allows to set the SMTP server address for e-mail sending.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#ESMTP=<smtp>
Set command sets the SMTP server address, used for sending e-mails. SMTP server can be
specified as IP address or as nick name.
Parameter:
Name
Type
Default
Description
<smtp>
string
-
SMTP server address. This parameter can be either:
• any valid IP address in the format: "xxx.xxx.xxx.xxx"
• any host name to be solved with a DNS query in the
format: <host name> (factory default is the empty
string "").
The SMTP server used shall be inside the APN space (the SMTP server provided by the
network operator) or it must allow the relay, otherwise the command will refuse to send
the e-mail.
AT#ESMTP?
Read Command reports the current SMTP server address, in the format:
#ESMTP: <smtp>
AT#ESMTP=?
Test command returns the max length for the parameter <smtp>.
Example of SMTP server format name:
AT#ESMTP="smtp.mydomain.com"
OK