EasyManua.ls Logo

Telit Wireless Solutions ME910G1 - AT&Y - Default Reset Basic Profile Designation

Telit Wireless Solutions ME910G1
545 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 31 of 545 2020-04-15
3.1.2.4. AT&Y - Default Reset Basic Profile Designation
Basic profile on startup.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT&Y=[<n>]
Set command defines the basic profile that will be loaded on startup. The wireless module can store
2 complete configurations (see &W).
Parameter:
Name
Type
Default
Description
<n>
integer
0
basic profile that will be loaded on startup.
Value:
0,1
:
profile index
Differently from command Z<n>, which loads just once the desired profile, the one
chosen through command &Y will be loaded on every startup.
If parameter is omitted the command has the same behavior as AT&Y0.

Table of Contents

Other manuals for Telit Wireless Solutions ME910G1

Related product manuals