Telit Wireless Solutions ME910G1 - AT#GAUTH - PPP Data Connection Authentication Type

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 340 of 545 2020-04-15
3.12.5. AT#GAUTH - PPP Data Connection Authentication Type
This command sets the authentication type used in PDP Context Activation during PPP-PS connections.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#GAUTH=[<type>]
Set command sets the authentication type used in PDP Context Activation during PPP-PS
connections.
Parameter:
Name
Type
Default
Description
<type>
integer
3
authentication type used in PDP Context Activation during PPP-
PS connections
Values:
0
:
no authentication
1
:
PAP authentication
2
:
CHAP authentication
3
:
AUTO authentication (PAP or CHAP or no authentication according to host
application)
if the settings on the server side (the host application) of the PPP are not compatible with
the #GAUTH setting, then the PDP Context Activation will use no authentication.
AT#GAUTH?
Read command reports the current authentication type, in the format:
#GAUTH: <type>
AT#GAUTH=?
Test command returns the range of supported values for parameter <type>.