Telit Wireless Solutions ME910G1 - AT#SA - Socket Accept

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 382 of 545 2020-04-15
3.13.14. AT#SA - Socket Accept
Execution command accepts an incoming socket connection.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#SA=<connId>[,<connMode>]
Execution command accepts an incoming socket connection after an URC
SRING: <connId>
Parameters:
Name
Type
Default
Description
<connId>
integer
N/A
Socket connection identifier.
Value:
1÷max
:
Socket connection identifier value (max is returned by the Test
command)
<connMode>
integer
0
Connection mode, as for command #SD.
Values:
0
:
online mode connection
1
:
command mode connection
The SRING URC has to be a consequence of a #SL issue.
Setting the command before to having received a SRING will result in an ERROR
indication, giving the information that a connection request has not yet been received.
AT#SA=?
Test command reports the range of values for all the parameters.