Telit Wireless Solutions ME910G1 - AT#SS - Socket Status

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 394 of 545 2020-04-15
3.13.21. AT#SS - Socket Status
Execution command reports the current sockets status.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#SS
Execution command reports the current sockets status using the following message format:
#SS: <connId>,<state>,<locIP>,<locPort>,<remIP>,<remPort><CR><LF>
[<connId>,<state>,<locIP>,<locPort>,<remIP>,<remPort><CR><LF>[...]]
Additional info:
Parameters meaning.
Name
Type
Default
Description
<connId>
integer
-
socket connection identifier
<state>
integer
0
actual state of the socket
Values:
0
:
socket closed
1
:
socket with an active data transfer connection
2
:
socket suspended
3
:
socket suspended with pending data
4
:
socket listening
5
:
socket with an incoming connection. Waiting for the user
accept or shutdown command
6
:
socket in opening process. The socket is not in Closed state
but still not in Active or Suspended or Suspended with
pending data state
<IocIP>
string
-
IP address associated by the context activation
to the socket
<IocPort>
integer
-
two meanings:
• the listening port if we put the socket
in listen mode
• the local port for the connection if we
use the socket to connect to a remote
machine
<remIP>
string
-
when we are connected to a remote machine
this is the remote IP address
<remPort>
string
-
it is the port we are connected to on the remote
machine
AT#SS=?
Test command reports the range for <connId> parameter.