Telit Wireless Solutions ME910G1 - AT#SMSMOVE - Move Short Message to Other Memory

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 254 of 545 2020-04-15
3.5.23. AT#SMSMOVE - Move Short Message to other Memory
This command moves selected Short Message from current memory to destination memory.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#SMSMOVE=<index>
Execution command moves selected Short Message from current memory to destination memory.
Parameter:
Name
Type
Default
Description
<index>
string
-
message index in the memory selected by +CPMS command. It
can have values form 1 to N, where N depends on the available
space, see +CPMS.
If the destination memory is full, an error is returned
AT#SMSMOVE?
Read command reports the message storage status of the current memory and the destination
memory in the format:
#SMSMOVE:<curr_mem>,<used_curr_mem>,<total_curr_mem>,
<dest_mem>,<used_dest_mem>,<total_dest_mem>
Additional info:
Parameters:
Name
Type
Default
Description
<curr_mem>
string
N/A
current memory, selected by +CPMS
command
Values:
SM
:
SIM SMS memory storage
ME
:
NVM SMS storage
<used_curr_mem>
integer
-
number of SMs stored in the current
memory
<total_curr_mem>
integer
-
max number of SMs that the current
memory can contain
<dest_mem>
string
SM
destination memory
Values:
SM
:
SIM memory
ME
:
device memory