Telit Wireless Solutions ME910G1 - AT+CSMP - Set Text Mode Parameters

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 218 of 545 2020-04-15
3.5.5. AT+CSMP - Set Text Mode Parameters
This command is used to select values for additional parameters for storing and sending SMS when the text
mode is used (AT+CMGF=1).
3GPP TS 27.005
3GPP TS 03.40/23.040
3GPP TS 03.38/23.038
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Other
No
-
2
AT+CSMP=[<fo>[,<vp>[,<pid>[,<dcs>]]]]
Set command is used to select values for additional parameters for storing and sending SMS when
the text mode is used (AT+CMGF=1).
Parameters:
Name
Type
Default
Description
<fo>
integer
-
depending on the command or result code:
first octet of 3GPP TS 03.40/23.040 SMS-DELIVER, SMS-
SUBMIT (default 17), SMS-STATUS-REPORT, or SMS-
COMMAND (default 2) in integer format.
<vp>
mixed
-
depending on SMS-SUBMIT <fo> setting:
3GPP TS 03.40/23.040 TP-Validity-Period either in integer format
(default 167) or in quoted time-string format.
<pid>
integer
-
3GPP TS 03.40/23.040 TP-Protocol-Identifier in integer format.
<dcs>
integer
-
depending on the command or result code:
3GPP TS 03.38/23.038 SMS Data Coding Scheme (default 0), or
Cell Broadcast Data Coding Scheme.
AT+CSMP?
Read command returns the current setting in the format:
+CSMP: <fo>,<vp>,<pid>,<dcs>
AT+CSMP=?
Test command returns the OK result code.
The current settings are stored through +CSAS