Telit Wireless Solutions ME910G1 - AT#MQDISC - Log out and Disconnect from the MQTT Broker

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 518 of 545 2020-04-15
3.22.7. AT#MQDISC - Log Out and Disconnect from the MQTT Broker
This command performs the logout and disconnection from to the MQTT broker.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#MQDISC=<instanceNumber>
Disconnects gracefully from the MQTT broker, then closes the network connection
Parameter:
Name
Type
Default
Description
<instanceNumber>
integer
N/A
selects the client instance to activate or
deactivate
Value:
1÷maxClients
:
client instance range. To know maxClients value
use test command
AT#MQDISC=?
Test command reports the available range of values for parameters.
AT#MQDISC=1
OK
Test command
AT#MQDISC=?
#MQDISC: (1-maxClients)
OK