EasyManua.ls Logo

Telit Wireless Solutions ME910G1 - AT#ATDELAY - at Command Delay

Telit Wireless Solutions ME910G1
545 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 73 of 545 2020-04-15
3.1.2.40. AT#ATDELAY - AT Command Delay
Set command sets a delay in second for the execution of successive AT command.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#ATDELAY=<delay>
Parameter:
Name
Type
Default
Description
<delay>
integer
0
delay interval
Value:
0÷max
:
delay expressed in 100 milliseconds intervals; 0 means no delay. For
max value refer to test command
<delay> is only applied to first command executed after #ATDELAY
AT#ATDELAY=?
Test command returns the supported range of values for parameter <delay>.
Set 5 seconds delay for "AT#GPIO=1,1,1" command
AT#GPIO=1,0,1;#ATDELAY=50;#GPIO=1,1,1
OK

Table of Contents

Other manuals for Telit Wireless Solutions ME910G1

Related product manuals