Telit Wireless Solutions ME910G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 201 of 545 2020-04-15
3.4.2. AT#STGI - SIM Toolkit Get Information
The #STGI command interfaces to the SIM/USIM Application Toolkit to get information on the ongoing
proactive command.
3GPP TS 31.111
Telit SIM/USIM Application Toolkit Application Note
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#STGI=[<cmdType>]
Set command gets parameters of the ongoing proactive command. The command can be used
after the reception of the #STN: <cmdType> URC. If no proactive command is ongoing, #STGI
returns an ERROR message.
Parameter:
Name
Type
Default
Description
<cmdType>
integer
N/A
proactive command code. For each proactive command
listed below, its #STGI response format is described in the
Additional info sections.
Values:
1
:
REFRESH
5
:
SET UP EVENT LIST
16
:
SET UP CALL
17
:
SEND SS
18
:
SEND USSD
19
:
SEND SHORT MESSAGE
20
:
SEND DTMF
32
:
PLAY TONE
33
:
DISPLAY TEXT
34
:
GET INKEY
35
:
GET INPUT
36
:
SELECT ITEM
37
:
SET UP MENU
40
:
SET UP IDLE MODE TEXT
Additional info:
<cmdType>=1 (REFRESH proactive command)
#STGI response format:
#STGI: 1,<refreshType>
Name
Type
Default
Description

Telit Wireless Solutions ME910G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ME910G1
Category	Wireless modules
Language	English