Telit Wireless Solutions ME910G1 - AT#MSCLASS - Multislot Class Control

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 339 of 545 2020-04-15
3.12.4. AT#MSCLASS - Multislot Class Control
Set command sets the GPRS multislot class.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#MSCLASS=[<class>[,<autoattach>]]
Parameters:
Name
Type
Default
Description
<class>
integer
33
GPRS multislot class.
Values:
1÷12
:
class
30÷33
:
class
<autoattach>
integer
0
specify when the new multislot class will be
enabled.
Values:
0
:
the new multislot class is enabled only at the next detach/attach or
after a reboot.
1
:
the new multislot class is enabled immediately, automatically forcing a
detach / attach procedure only in case of GSM network registered
AT#MSCLASS?
Read command reports the current value of the multislot class in the format:
#MSCLASS: <class>
AT#MSCLASS=?
Test command reports the range of available values for both parameters <class> and
<autoattach>.