Telit Wireless Solutions ME910G1 - AT#EPASSW - E-Mail Authentication Password

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 450 of 545 2020-04-15
3.15.8. AT#EPASSW - E-mail Authentication Password
This command sets the password string to be used during the authentication step of the SMTP.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#EPASSW=[<ePwd>]
Parameter:
Name
Type
Default
Description
<ePwd>
string
""
e-mail authentication password that can have any string value
up to max length reported by test command
Value:
""
:
factory default
If no authentication is required then the <ePwd> parameter shall be empty "".
AT#EPASSW=?
Test command returns the maximum allowed length of the string parameter <ePwd>.
AT#EPASSW="myPassword"
OK