Telit Wireless Solutions ME910G1 - AT#CCLKMODE - Clock Mode

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 286 of 545 2020-04-15
3.7.9. AT#CCLKMODE - Clock Mode
This command allows to enable the local time or the UTC time.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#CCLKMODE=<mode>
Set command enables the local time or the UTC time in +CCLK and #CCLK commands and in
#NITZ URC
Parameter:
Name
Type
Default
Description
<mode>
integer
0
Time and date mode
Values:
0
:
Local time + local time zone offset
1
:
UTC time + local time zone offset
AT#CCLKMODE?
Read command reports whether the local time or the UTC time is enabled, in the
format:
#CCLKMODE: <mode>
AT#CCLKMODE=?
Test command reports the supported range of values for parameter <mode>