Telit Wireless Solutions ME910G1 - Page 397

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 397 of 545 2020-04-15
AT#SI=?
Test command reports the range of <connId> parameter.
•
Get information about data traffic of all sockets.
AT#SI
#SI: 1,123,400,10,50
#SI: 2,0,100,0,0
#SI: 3,589,100,10,100
#SI: 4,0,0,0,0
#SI: 5,0,0,0,0
...
OK
•
Assume that sockets 1,2,3 are opened and having some data traffic. To get traffic
information only for the socket <connId>=1 enter the following command:
AT#SI=1
#SI: 1,123,400,10,50
OK
Socket <connId>=1 has 123 bytes sent, 400 bytes received, 10 bytes waiting to be
read and 50 bytes waiting to be acknowledged from the remote side.