Telit Wireless Solutions ME910G1 - Page 140

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 140 of 545 2020-04-15
Additional info:
Parameters returned by the read command.
Name
Type
Default
Description
<func>
integer
N/A
can assume the following values:
Values:
0
:
#CEERNETEXT URC is disabled
1
:
#CEERNETEXT URC is enabled
AT#CEERNETEXT=?
Test command reports the supported range of values for the <func> parameter.