Telit Wireless Solutions ME910G1 - Page 165

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 165 of 545 2020-04-15
Extended DRX parameters information element
(see subclause 10.5.5.32 of 3GPP TS 24.008).
For the coding and the value range, see the
Extended DRX parameters information element
in 3GPP TS 24.008 Table 10.5.5.32/3GPP TS
24.008. Default value is "0000"
Additional info:
If <mode>=2 and there is a change in the eDRX parameters provided by the network, the
unsolicited result code reports:
#CEDRXP:<AcTtype>[,<Req_eDRX>[,<NW_prov_eDRX>[,<ReqPagTimeWindow>
[,<NW_prov_PagTimeWindow>]]]]
Name
Type
Default
Description
<NW_prov_eDRX>
string
-
half a byte in a 4-bit format. The
eDRX value refers to bit 4 to 1
of octet 3 of the Extended DRX
parameters information element
(see subclause 10.5.5.32 of
3GPP TS 24.008). For the
coding and the value range, see
Extended DRX parameters
information element in 3GPP TS
24.008 Table 10.5.5.32/3GPP
TS 24.008.
<NW_prov_PagTimeWindow>
string
-
half a byte in a 4-bit format. The
paging time window refers to bit
8 to 5 of octet 3 of the Extended
DRX parameters information
element (see subclause
10.5.5.32 of 3GPP TS 24.008).
For the coding and the value
range, see the Extended DRX
parameters information element
in 3GPP TS 24.008 Table
10.5.5.32/3GPP TS 24.008
AT#CEDRXS?
Read command returns the current settings for each defined value of <AcTtype> in the format:
#CEDRXS:<AcTtype>,<eDRX_act_state>,<Req_eDRX>,<ReqPagTimeWindow>[<CR><LF>
#CEDRXS:<AcTtype>,<eDRX_act_state>,<Req_eDRX>,<ReqPagTimeWindow>[...]]]
Additional info:
Meaning of the <eDRX_act_state> parameter.
Name
Type
Default
Description
<eDRX_act_state>
integer
0
eDRX status
Values: