Telit Wireless Solutions ME910G1 - Page 185

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 185 of 545 2020-04-15
0÷255
:
parameter P3 passed on to the UICC in a command APDU
<data>
string
-
information to be read from UICC or written to the UICC
(hexadecimal character format).
Additional info:
Response data fields:
Name
Type
Default
Description
<sw1>
integer
-
information from the UICC about the execution of
the actual command (successful or failed)
<sw2>
integer
-
information from the UICC about the execution of
the actual command (successful or failed)
<response>
hex
-
on a successful completion of the previously issued
command it shows the response data. It is not
returned after a successful UPDATE BINARY or
UPDATE RECORD command
AT+CRSM=?
Test command returns the OK result code
Read binary, ICCID(2FE2)
AT+CRSM=176,12258,0,0,10
+CRSM: 144,0,982850702001107686F4
OK
Read record, ADN(6F3A)
AT+CRSM=178,28474,1,4,40
+CRSM: 144,0,42434A554EFFFFFFFFFFFFFFFFFFFFFF06811056789282FFFFFFFFFFFFFF
OK
Update Binary, KcGPRS(6F52)
AT+CRSM=214,28539,0,0,8,C69018C7958C87
+CRSM: 144,0
OK
Update Record, ADN(6F3A)
AT+CRSM=220,28474,9,4,30,657469FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFF
+CRSM: 144,0
OK
Status, FPLMN(6F7B)
AT+CRSM=242,28539
+CRSM:144,0,623C820238218410A0000000871002FFFFFFFF89040300FFA51180013181030
10A3282011E8304000030E08A01058B032F0609C6099001C0830101830181
OK