Telit Wireless Solutions ME910G1 - Page 204

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 204 of 545 2020-04-15
<text>
string
-
text provided by the SIM/USIM device in ASCII
format
<cmdType>=34 (GET INKEY proactive command)
#STGI response format:
#STGI: 34,<cmdDetails>,<text>
Name
Type
Default
Description
<cmdDetails>
hex
N/A
a bit mask where each bit position, according to
its value, has a specific meaning:
bit 0:
0 - digits only (0-9, *, # and +)
1 - alphabet set
bit 1:
0 - SMS default alphabet (GSM character set)
1 - UCS2 alphabet
bit 2:
0 - character sets defined by bit 0 and bit 1 are
enabled
1 - character sets defined by bit 0 and bit 1 are
disabled and the "Yes/No" response is requested
bits 3-6:
0
bit 7:
0 - no help information available
1 - help information available
Value:
0x00÷0x87
:
mask
<text>
string
-
string as prompt for test
<cmdType>=35 (GET INPUT proactive command)
#STGI response format:
#STGI: 35,<cmdDetails>,<text>,<responseMin>,<responseMax>[,<defaultText>]
Name
Type
Default
Description
<cmdDetails>
hex
N/A
a bit mask where each bit position, according
to its value, has a specific meaning:
bit 0:
0 - digits only (0-9, *, #, and +)
1 - alphabet set
bit 1:
0 - SMS default alphabet (GSM character set)
1 - UCS2 alphabet
bit 2:
0 - ME may echo user input on the display
1 - user input shall not be revealed in any way.
Hidden entry mode is only available when
using digit input. In hidden entry mode only
characters ('0'-'9', '*' and '#') are allowed.