Telit Wireless Solutions ME910G1 - Page 207

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 207 of 545 2020-04-15
<nextActionId>
integer
-
numerical code of next proactive command type
to be issued upon execution of the menu item.
If <nextActionId>=0, no next action information
available.
<cmdType>=40 (SET UP IDLE MODE TEXT proactive command)
#STGI response format:
#STGI: 40,<idleModeTextString>
Name
Type
Default
Description
<idleModeTextString>
string
-
text provided by the SIM/USIM device in
ASCII format
The proactive commands are only those command types that use the AT interface.
SAT/USAT commands which are not using the AT interface (not MMI related SAT
commands, e.g. PROVIDE LOCAL INFORMATION) are executed without sending any
indication to the user.
AT#STGI?
The read command returns the ongoing proactive command and the SAT/USAT state. The
message format is:
#STGI: <state>,<cmdType>
Additional info:
Returned parameters:
Name
Type
Default
Description
<state>
integer
-
state of the sending of the SET UP MENU proactive
command (37), refer to AT#STIA? command
<cmdType>
integer
-
ongoing proactive command code
AT#STGI=?
Test command returns the supported values of parameters <state> and <cmdType>.