Telit Wireless Solutions ME910G1 - Page 329

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 329 of 545 2020-04-15
0
:
dummy value
<carrNum2G>
integer
100
is the minimum number of possible jammed carriers to
consider that the module is under jamming condition
Value:
0÷200
:
number of carriers
<pRxLevT2G>
integer
15
set the threshold of RxLev in 2G Network. The
RxLev_Thr threshold is calculated as shown below:
RxLev_Thr = RxLev_Av * (1 + (<pRxLevT2G>/100))
where RxLev_Av is the average of the last 10 RxLev
measures.
Value:
0÷100
:
values used to compute RxLev_Thr threshold
<unused>
integer
N/A
unused parameter
Value:
0
:
dummy value
<unused>
integer
N/A
unused parameter
Value:
0
:
dummy value
<unused>
integer
N/A
unused parameter
Value:
0
:
dummy value
<P_RSSI_T4G>
integer
20
Set the threshold of RSSI. The threshold
(T_RSSI_MAX/T_RSSI_MIN) is calculated as:
T_RSSI_MAX = RSSI_Avg*(1+(<P_RSSI_T4G>/100))
T_RSSI_MIN = RSSI_Avg*(1-(<P_RSSI_T4G>/100))
where RSSI_Avg is the average of the last 50 RSSI
measures.
Value:
0÷100
:
RSSI threshold values
<P_RSRQ_T4G>
integer
20
Set the threshold of RSRQ. The threshold (RSRQ_Thr)
is calculated as
RSRQ_Thr = RSRQ_Avg*(1-(<P_RSRQ_T4G>/100))
where RSRQ_Avg is the average of the last 50 RSRQ
measures.
Value:
0÷100
:
RSRQ threshold values
<unused>
integer
0
unused parameter