Telit Wireless Solutions ME910G1 - Page 363

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 363 of 545 2020-04-15
AT#SGACTCFGEXT?
Read command reports the state of all the five contexts, in the format:
#SGACTCFGEXT: <cid
1
>,< abortAttemptEnable
1
>,0,0,0<CR><LF>
...
#SGACTCFGEXT: <cid
n
>,< abortAttemptEnable
n
>,0,0,0<CR><LF>
AT#SGACTCFGEXT=?
Test command reports supported range of values for all parameters.
•
See #SGACTCFG command
AT#SGACTCFG?
#SGACTCFG: 1,15,3600,0
OK
AT#SGACTCFGEXT?
#SGACTCFGEXT: 1,0,0,0,0
OK
AT#SGACTCFGEXT=1,1,0,0,0
OK
AT#SGACTCFGEXT?
#SGACTCFGEXT: 1,1,0,0,0
OK
Reboot the module
AT#SGACTCFGEXT?
#SGACTCFGEXT: 1,1,0,0,0
OK