Telit Wireless Solutions ME910G1 - Page 404

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 404 of 545 2020-04-15
•
Skip the escape sequence, its transmission is not enabled
AT#SKIPESC=1
OK
Open a remote connection in online mode
AT#SD=<connId>,<txProt>,<rPort>,<IPaddr>
CONNECT
data sent without modifications (default)
..........
+++ (suspension)
OK
Encode data coming from serial port.
AT#BASE64=<connId>,1,0
OK
Resume suspended socket
AT#SO=<connId>
CONNECT
data received from serial port are base64 encoded and sent to the socket
..........
+++ (suspension)
OK
Decode data coming from socket.
AT#BASE64=<connId>,0,1
OK
Resume suspended socket
AT#SO=<connId>
CONNECT
data received from socket are base64 decoded and sent to the serial port
..........
+++ (suspension)
OK