Telit Wireless Solutions ME910G1 - Page 406

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 406 of 545 2020-04-15
AT#FRWL=?
Test command returns the allowed values for parameter <action>.
•
Let assume we want to accept connections only from our devices which are on the
IP addresses ranging from
197.158.1.1 to 197.158.255.255
We need to add the following chain to the firewall:
AT#FRWL=1,"197.158.1.1","255.255.0.0"
OK