Telit Wireless Solutions ME910G1 - Page 410

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 410 of 545 2020-04-15
Software customization
<pdpId> default value
Verizon
3
All other
1
Unsolicited fields:
Name
Type
Description
<replyId>
integer
Echo Reply number
<IpAddress>
string
IP address of the remote host
<replyTime>
integer
time, in 100 ms units, required to receive the response
<ttl>
integer
time to live of the Echo Reply message
When the Echo Request timeout expires (no reply received on time) the response will
contain <replyTime> set to 600 and <ttl> set to 255.
To receive the corresponding Echo Reply is not required to enable separately #ICMP
AT#PING=?
Test command reports the supported range of values for the #PING command parameters.
AT#PING="www.telit.com"
#PING: 01,"81.201.117.177",6,50
#PING: 02,"81.201.117.177",5,50
#PING: 03,"81.201.117.177",6,50
#PING: 04,"81.201.117.177",5,50
OK