Telit Wireless Solutions ME910G1 - Page 461

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 461 of 545 2020-04-15
AT#SSLCFG?
Read command reports the parameters current values in the format:
#SSLCFG:<SSId>,<cid>,<pktSz>,<maxTo>,<defTo>,<txTo>,<skipHostMismatch>,<SSLSRingMod
e>,0,<equalizeTX>
AT#SSLCFG=?
Test command reports the ranges of all parameters values.