Texas Instruments TI-84 Plus Guide Book

Chapter 3: Function Graphing 120
4. When you have defined the box, press Í to replot the graph.
To use
ZBox to define another box within the new graph, repeat steps 2 through 4. To
cancel
ZBox, press ‘.
Zoom In, Zoom Out
Zoom In, Zoom OutZoom In, Zoom Out
Zoom In, Zoom Out
Zoom In magnifies the part of the graph that surrounds the cursor location. Zoom Out
displays a greater portion of the graph, centered on the cursor location. The
XFact and
YFact settings determine the extent of the zoom.
To zoom in on a graph, follow these steps.
1. Check
XFact and YFact; change as needed.
2. Select
2:Zoom In from the ZOOM menu. The zoom cursor is displayed.
3. Move the zoom cursor to the point that is to be the center of the new viewing
window.
4. Press Í. The TI-83 Plus adjusts the viewing window by
XFact and YFact;
updates the window variables; and replots the selected functions, centered on the
cursor location.
5. Zoom in on the graph again in either of two ways.

Texas Instruments TI-84 Plus Specifications

General

Battery type	AAA
Power source	Battery
Number of batteries supported	4
Type	Graphing
Cover	No
Form factor	Pocket
Control type	Buttons
Product color	Black
USB port	Yes
USB 2.0 ports quantity	1
Digits	- digits
Display number of lines	8 lines
Display number of characters	16
RAM capacity	0.024 MB
ROM capacity	0.480 MB
Storage media type	-