EasyManua.ls Logo

Texas Instruments TI-84 Plus - Entering a User-Created List Name Directly

Texas Instruments TI-84 Plus
696 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 11: Lists 252
Note: From the top of a menu, press } to move to the bottom. From the bottom, press
to move to the top.
When you select a list name from the
LIST NAMES menu, the list name is pasted to the
current cursor location.
The list name symbol Ù precedes a list name when the name is pasted where non-
list name data also is valid, such as the home screen.
•The Ù symbol does not precede a list name when the name is pasted where a list
name is the only valid input, such as the stat list editor’s
Name= prompt or the stat
plot editor’s
XList: and YList: prompts.
Entering a User-Created List Name Directly
Entering a User-Created List Name DirectlyEntering a User-Created List Name Directly
Entering a User-Created List Name Directly
To enter an existing list name directly, follow these steps.
1. Press y 9 ~ to display the
LIST OPS menu.

Table of Contents

Other manuals for Texas Instruments TI-84 Plus

Related product manuals