Chapter 14: Applications 408
To change a predefined setting:
1. From the main screen in the EasyData App, choose
Setup and select 2: Time Graph.
The current settings are displayed on the calculator.
Note: If using a motion detector, settings for 3: Distance Match and 4: Ball Bounce in
the
Setup menu are preset and cannot be changed.
2. Select
Next (press q) to move to the setting you want to change. Press ‘ to
clear a setting.
3. Repeat to cycle through the available options. When the option is correct, select
Next to move to the next option.
4. To change a setting, enter 1 or 2 digits, and then select
Next (press q).
5. When all the settings are correct, select
OK (press s) to return to the main
menu.
6. Select
Start (press q) to begin collecting data.
Restoring EasyData to the default settings
The default settings are appropriate for a wide variety of sampling situations. If you are
unsure of the best settings, begin with the default settings, and then adjust the settings
for your specific activity.
To restore the default settings in EasyData while a data collection device is connected to
the TI-84 Plus, choose
File and select 1:New.
To Next Page
Loading...
Need help?
General
