Texas Instruments TI-84 Plus Guide Book

Chapter 19: Communication Link 558
12. Press Í on the receiving unit.
13. Press Í on the sending unit. A copy of the selected item(s) is sent to the
receiving unit.
14. Repeat steps 7 through 13 until the items are sent to all additional units.
Sending to a TI-83 Plus or TI-83 Plus Silver Edition
Sending to a TI-83 Plus or TI-83 Plus Silver EditionSending to a TI-83 Plus or TI-83 Plus Silver Edition
Sending to a TI-83 Plus or TI-83 Plus Silver Edition
You can send all variables from a TI-84 Plus to a TI-83 Plus or TI-83 Plus Silver Edition
except Flash applications with new features, or programs with new features in them.
If archived variables on the TI-84 Plus are variable types recognized and used on the
TI-83 Plus or TI-83 Plus Silver Edition, you can send these variables to the TI-83 Plus or
TI-83 Plus Silver Edition. They will be automatically sent to the RAM of the TI-83 Plus or
TI-83 Plus Silver Edition during the transfer process. It will send to archive if the item is
from archive.
To send data to a TI-83 Plus or TI-83 Plus Silver Edition:
1. Use an I/O unit-to-unit cable to link the two units together.
2. Set the TI-83 Plus or TI-83 Plus Silver Edition to receive.
3. Press y 8 on the sending TI-84 Plus to display the
LINK SEND menu.
4. Select the menu of the items you want to transmit.
5. Press ~ on the sending TI-84 Plus to display the
LINK TRANSMIT menu.
6. Confirm that the receiving unit is set to receive.
7. Press Í on the sending TI-84 Plus to select
1:Transmit and begin transmitting.

Texas Instruments TI-84 Plus Specifications

General

Battery type	AAA
Power source	Battery
Number of batteries supported	4
Type	Graphing
Cover	No
Form factor	Pocket
Control type	Buttons
Product color	Black
USB port	Yes
USB 2.0 ports quantity	1
Digits	- digits
Display number of lines	8 lines
Display number of characters	16
RAM capacity	0.024 MB
ROM capacity	0.480 MB
Storage media type	-