Texas Instruments TI-84 Plus Guide Book

Chapter 8: Draw Instructions 189
Drawing Line Segments
Drawing Line SegmentsDrawing Line Segments
Drawing Line Segments
Drawing a Line Segment Directly on a Graph
Drawing a Line Segment Directly on a GraphDrawing a Line Segment Directly on a Graph
Drawing a Line Segment Directly on a Graph
To draw a line segment when a graph is displayed, follow these steps.
1. Select
2:Line( from the DRAW menu.
2. Place the cursor on the point where you want the line segment to begin, and then
press Í.
3. Move the cursor to the point where you want the line segment to end. The line is
displayed as you move the cursor. Press Í.
To continue drawing line segments, repeat steps 2 and 3. To cancel
Line(, press ‘.
Drawing a Line Segment from the Home Screen or a Program
Drawing a Line Segment from the Home Screen or a ProgramDrawing a Line Segment from the Home Screen or a Program
Drawing a Line Segment from the Home Screen or a Program
Line( also draws a line segment between the coordinates (X1,Y1) and (X2,Y2). The values
may be entered as expressions.

Texas Instruments TI-84 Plus Specifications

General

Battery type	AAA
Power source	Battery
Number of batteries supported	4
Type	Graphing
Cover	No
Form factor	Pocket
Control type	Buttons
Product color	Black
USB port	Yes
USB 2.0 ports quantity	1
Digits	- digits
Display number of lines	8 lines
Display number of characters	16
RAM capacity	0.024 MB
ROM capacity	0.480 MB
Storage media type	-