Texas Instruments TI-84 Plus Guide Book

Chapter 11: Lists 247
Naming Lists
Naming ListsNaming Lists
Naming Lists
Using TI-84 Plus List Names L
Using TI-84 Plus List Names LUsing TI-84 Plus List Names L
Using TI-84 Plus List Names L1
11
1 through L
through L through L
through L6
66
6
The TI-84 Plus has six list names in memory: L1, L2, L3, L4, L5, and L6. The list names
L1 through L6 are on the keyboard above the numeric keys À through ¸. To paste one
of these names to a valid screen, press y, and then press the appropriate key.
L1
through
L6 are stored in stat list editor columns 1 through 6 when you reset memory.
5. Press Í to generate the list and store it in
SEQ1. The list is displayed on the home screen.
An ellipsis (
...) indicates that the list continues
beyond the viewing window. Press ~ repeatedly
(or press and hold ~) to scroll the list and view all
the list elements.
6. Press y 9 to display the
LIST NAMES menu.
Press
7 to select 7:seq( to paste ÙSEQ1 to the
current cursor location. (If
SEQ1 is not item 7 on
your
LIST NAMES menu, move the cursor to SEQ1
before you press Í.)
7. Press  to display the
MATH menu. Press 1 to
select
1:4Frac, which pastes 4Frac to the current
cursor location.
8. Press Í to show the sequence in fraction
form. Press ~ repeatedly (or press and hold ~) to
scroll the list and view all the list elements.

Texas Instruments TI-84 Plus Specifications

General

Battery type	AAA
Power source	Battery
Number of batteries supported	4
Type	Graphing
Cover	No
Form factor	Pocket
Control type	Buttons
Product color	Black
USB port	Yes
USB 2.0 ports quantity	1
Digits	- digits
Display number of lines	8 lines
Display number of characters	16
RAM capacity	0.024 MB
ROM capacity	0.480 MB
Storage media type	-