Texas Instruments TI-84 Plus Guide Book

Chapter 6: Sequence Graphing 166
Valid Functions for Web Plots
Valid Functions for Web PlotsValid Functions for Web Plots
Valid Functions for Web Plots
When Web axes format is selected, a sequence will not graph properly or will generate
an error.
• It must be recursive with only one recursion level (
u(nN1) but not u(nN2)).
• It cannot reference
n directly.
• It cannot reference any defined sequence except itself.
Displaying the Graph Screen
Displaying the Graph ScreenDisplaying the Graph Screen
Displaying the Graph Screen
In Web format, press s to display the graph screen. The TI-84 Plus:
•Draws a
y=x reference line in AxesOn format.
• Plots the selected sequences with
u(nN1) as the independent variable.
Note: A potential convergence point occurs whenever a sequence intersects the y=x
reference line. However, the sequence may or may not actually converge at that point,
depending on the sequence’s initial value.
Drawing the Web
Drawing the WebDrawing the Web
Drawing the Web
To activate the trace cursor, press r. The screen displays the sequence and the
current
n, X, and Y values (X represents u(nN1) and Y represents u(n)). Press ~
repeatedly to draw the web step by step, starting at
nMin. In Web format, the trace cursor
follows this course.
1. It starts on the x-axis at the initial value
u(nMin) (when PlotStart=1).

Texas Instruments TI-84 Plus Specifications

General

Battery type	AAA
Power source	Battery
Number of batteries supported	4
Type	Graphing
Cover	No
Form factor	Pocket
Control type	Buttons
Product color	Black
USB port	Yes
USB 2.0 ports quantity	1
Digits	- digits
Display number of lines	8 lines
Display number of characters	16
RAM capacity	0.024 MB
ROM capacity	0.480 MB
Storage media type	-