Texas Instruments TI-84 Plus Guide Book

Chapter 11: Lists 264
example, you can use Select( to select and then analyze a portion of plotted
CBL 2™/CBL™ or CBR™ data.
Select(xlistname,ylistname)
Note:
Before you use Select(, you must have selected (turned on) a scatter plot or xyLine
plot. Also, the plot must be displayed in the current viewing window.
Before Using Select(
Before Using Select(Before Using Select(
Before Using Select(
Before using
Select(, follow these steps.
1. Create two list names and enter the data.
2. Turn on a stat plot, select " (scatter plot) or Ó (xyLine), and enter the two list names
for
Xlist: and Ylist: (Chapter 12).
3. Use
ZoomStat to plot the data (Chapter 3).
Using Select( to Select Data Points from a Plot
Using Select( to Select Data Points from a PlotUsing Select( to Select Data Points from a Plot
Using Select( to Select Data Points from a Plot
To select data points from a scatter plot or xyLine plot, follow these steps.
1. Press y 9 ~
8 to select 8:Select( from the LIST OPS menu. Select( is pasted to
the home screen.

Texas Instruments TI-84 Plus Specifications

General

Battery type	AAA
Power source	Battery
Number of batteries supported	4
Type	Graphing
Cover	No
Form factor	Pocket
Control type	Buttons
Product color	Black
USB port	Yes
USB 2.0 ports quantity	1
Digits	- digits
Display number of lines	8 lines
Display number of characters	16
RAM capacity	0.024 MB
ROM capacity	0.480 MB
Storage media type	-