Texas Instruments TI-84 Plus Guide Book

Chapter 8: Draw Instructions 188
Clearing Drawings
Clearing DrawingsClearing Drawings
Clearing Drawings
Clearing Drawings When a Graph Is Displayed
Clearing Drawings When a Graph Is DisplayedClearing Drawings When a Graph Is Displayed
Clearing Drawings When a Graph Is Displayed
All points, lines, and shading drawn on a graph with DRAW instructions are temporary.
To clear drawings from the currently displayed graph, select
1:ClrDraw from the DRAW
menu. The current graph is replotted and displayed with no drawn elements.
Clearing Drawings from the Home Screen or a Program
Clearing Drawings from the Home Screen or a ProgramClearing Drawings from the Home Screen or a Program
Clearing Drawings from the Home Screen or a Program
To clear drawings on a graph from the home screen or a program, begin on a blank line
on the home screen or in the program editor. Select
1:ClrDraw from the DRAW menu.
The instruction is copied to the cursor location. Press Í.
When
ClrDraw is executed, it clears all drawings from the current graph and displays the
message
Done. When you display the graph again, all drawn points, lines, circles, and
shaded areas will be gone.
Note: Before you clear drawings, you can store them with StorePic.

Texas Instruments TI-84 Plus Specifications

General

Battery type	AAA
Power source	Battery
Number of batteries supported	4
Type	Graphing
Cover	No
Form factor	Pocket
Control type	Buttons
Product color	Black
USB port	Yes
USB 2.0 ports quantity	1
Digits	- digits
Display number of lines	8 lines
Display number of characters	16
RAM capacity	0.024 MB
ROM capacity	0.480 MB
Storage media type	-