Texas Instruments TI-84 Plus - Drawing Points on a Graph; DRAW POINTS Menu; Drawing Points Directly on a Graph with Pt-On(

Chapter 8: Draw Instructions 201
Drawing Points on a Graph
Drawing Points on a GraphDrawing Points on a Graph
Drawing Points on a Graph
DRAW POINTS Menu
DRAW POINTS MenuDRAW POINTS Menu
DRAW POINTS Menu
To display the
DRAW POINTS menu, press y<~. The TI-84 Plus’s interpretation of
these instructions depends on whether you accessed this menu from the home screen
or the program editor or directly from a graph.
Drawing Points Directly on a Graph with
Drawing Points Directly on a Graph with Drawing Points Directly on a Graph with
Drawing Points Directly on a Graph with Pt
PtPt
Pt
-On(
On(On(
On(
To draw a point on a graph, follow these steps.
1. Select
1:Pt-On( from the DRAW POINTS menu.
2. Move the cursor to the position where you want to draw the point.
3. Press Í to draw the point.
DRAW POINTS STO
1: Pt-On(
Turns on a point.
2: Pt-Off(
Turns off a point.
3: Pt-Change(
Toggles a point on or off.
4: Pxl-On(
Turns on a pixel.
5: Pxl-Off(
Turns off a pixel.
6: Pxl-Change(
Toggles a pixel on or off.
7: pxl-Test(
Returns 1 if pixel on, 0 if pixel off.