Texas Instruments TI-84 Plus Guide Book

Appendix B: Reference Information 649
Error in Xmit
• The TI-84 Plus was unable to transmit an item. Check
to see that the cable is firmly connected to both units
and that the receiving unit is in receive mode.
• You pressed
É to break during transmission.
• You attempted to perform a backup from a TI.82 to a
TI-84 Plus.
• You attempted to transfer data (other than
L1 through
L6) from a TI-84 Plus to a TI.82.
• You attempted to transfer
L1 through L6 from a TI-84
Plus to a TI.82 without using
5:Lists to TI82 on the
LINK SEND menu.
ID NOT FOUND This error occurs when the SendID command is
executed but the proper graphing calculator ID cannot
be found.
ILLEGAL NEST
• You attempted to use an invalid function in an
argument to a function, such as
seq( within expression
for
seq(.
INCREMENT • The increment in seq( is 0 or has the wrong sign. This
error is not returned during graphing. The TI-84 Plus
allows for undefined values on a graph.
• The increment in a
For( loop is 0.
Error Type Possible Causes and Suggested Remedies

Texas Instruments TI-84 Plus Specifications

General

Battery type	AAA
Power source	Battery
Number of batteries supported	4
Type	Graphing
Cover	No
Form factor	Pocket
Control type	Buttons
Product color	Black
USB port	Yes
USB 2.0 ports quantity	1
Digits	- digits
Display number of lines	8 lines
Display number of characters	16
RAM capacity	0.024 MB
ROM capacity	0.480 MB
Storage media type	-