Texas Instruments TI-84 Plus Guide Book

Chapter 14: Applications 407
Steps for Running the EasyData App
Steps for Running the EasyData AppSteps for Running the EasyData App
Steps for Running the EasyData App
Follow these basic steps when using the EasyData App.
Starting EasyData
Quitting EasyData
1. To quit EasyData, select Quit (press s).
The
Ready to quit? screen is displayed, which indicates that the collected data has
been transferred to lists
L1 through L4 on the TI-84 Plus.
2. Press
OK (press s) to quit.
EasyData Settings
EasyData SettingsEasyData Settings
EasyData Settings
Changing EasyData settings
EasyData displays the most commonly used settings before data collection begins.
1. Attach your data collection device to your TI-84 Plus.
Make sure the cables are firmly connected.
2. If the EasyData app has not auto-launched, press Œ
and the } or † to select the EasyData App.
3. Press Í. The EasyData information screen is
displayed for about three seconds followed by the main
screen.

Texas Instruments TI-84 Plus Specifications

General

Battery type	AAA
Power source	Battery
Number of batteries supported	4
Type	Graphing
Cover	No
Form factor	Pocket
Control type	Buttons
Product color	Black
USB port	Yes
USB 2.0 ports quantity	1
Digits	- digits
Display number of lines	8 lines
Display number of characters	16
RAM capacity	0.024 MB
ROM capacity	0.480 MB
Storage media type	-