Chapter 19: Communication Link 565
• You try to use GetCalc( with a TI-83 instead of a TI-84 Plus or TI-84 Plus Silver
Edition.
Insufficient Memory in Receiving Unit
Insufficient Memory in Receiving UnitInsufficient Memory in Receiving Unit
Insufficient Memory in Receiving Unit
• During transmission, if the receiving unit does not have sufficient memory to receive
an item, the
Memory Full menu is displayed on the receiving unit.
• To skip this item for the current transmission, select
1:Omit. Transmission resumes
with the next item.
• To cancel the transmission and exit receive mode, select
2:Quit.
To Next Page
Loading...
