Texas Instruments TI-84 Plus Guide Book

Chapter 19: Communication Link 550
TI-84 Plus LINK
TI-84 Plus LINKTI-84 Plus LINK
TI-84 Plus LINK
This chapter describes how to communicate with compatible TI units. The TI-84 Plus
has a USB port to connect and communicate with another TI-84 Plus or TI-84 Plus Silver
Edition. A USB unit-to-unit cable is included with the TI-84 Plus.
The TI-84 Plus also has an I/O port using a I/O unit-to-unit cable to communicate with:
Connecting Two Graphing Calculators with a USB Unit-to-Unit Cable or
Connecting Two Graphing Calculators with a USB Unit-to-Unit Cable or Connecting Two Graphing Calculators with a USB Unit-to-Unit Cable or
Connecting Two Graphing Calculators with a USB Unit-to-Unit Cable or
an I/O Unit-to-Unit Cable
an I/O Unit-to-Unit Cablean I/O Unit-to-Unit Cable
an I/O Unit-to-Unit Cable
USB Unit-to-Unit Cable
• TI-83 Plus Silver Edition
• TI-83 Plus
•TI-83
•TI-82
•TI-73
• CBL 2™ or a CBR™
The TI-84 Plus USB link port is located at the
top right edge of the graphing calculator.
1. Firmly insert either end of the USB
unit-to-unit cable into the USB port.
2. Insert the other end of the cable into the
other graphing calculator’s USB port.

Texas Instruments TI-84 Plus Specifications

General

Battery type	AAA
Power source	Battery
Number of batteries supported	4
Type	Graphing
Cover	No
Form factor	Pocket
Control type	Buttons
Product color	Black
USB port	Yes
USB 2.0 ports quantity	1
Digits	- digits
Display number of lines	8 lines
Display number of characters	16
RAM capacity	0.024 MB
ROM capacity	0.480 MB
Storage media type	-