Texas Instruments TI-84 Plus Guide Book

Chapter 9: Split Screen 219
Note: Each set of numbers in parentheses above represents the row and column of a
corner pixel, which is turned on.
DRAW POINTS Menu Pixel Instructions
DRAW POINTS Menu Pixel InstructionsDRAW POINTS Menu Pixel Instructions
DRAW POINTS Menu Pixel Instructions
For
Pxl-On(, Pxl-Off(, Pxl-Change(, and pxl-Test(:
•In
Horiz mode, row must be {30; column must be {94.
•In
G-T mode, row must be {50; column must be {46.
Pxl-On(row,column)
DRAW Menu Text( Instruction
DRAW Menu Text( InstructionDRAW Menu Text( Instruction
DRAW Menu Text( Instruction
For the
Text( instruction:
•In
Horiz mode, row must be {25; column must be {94.
•In
G-T mode, row must be {45; column must be {46.
Text(row,column,"text")
PRGM I/O Menu Output( Instruction
PRGM I/O Menu Output( InstructionPRGM I/O Menu Output( Instruction
PRGM I/O Menu Output( Instruction
For the
Output( instruction:
•In
Horiz mode, row must be {4; column must be {16.
•In
G-T mode, row must be {8; column must be {16.

Texas Instruments TI-84 Plus Specifications

General

Battery type	AAA
Power source	Battery
Number of batteries supported	4
Type	Graphing
Cover	No
Form factor	Pocket
Control type	Buttons
Product color	Black
USB port	Yes
USB 2.0 ports quantity	1
Digits	- digits
Display number of lines	8 lines
Display number of characters	16
RAM capacity	0.024 MB
ROM capacity	0.480 MB
Storage media type	-