Chapter 9: Split Screen 220
Output(row,column,"text")
Note:
The Output( instruction can only be used within a program.
Setting a Split-Screen Mode from the Home Screen or a Program
Setting a Split-Screen Mode from the Home Screen or a ProgramSetting a Split-Screen Mode from the Home Screen or a Program
Setting a Split-Screen Mode from the Home Screen or a Program
To set
Horiz or G-T from a program, follow these steps.
1. Press z while the cursor is on a blank line in the program editor.
2. Select
Horiz or G-T.
The instruction is pasted to the cursor location. The mode is set when the instruction is
encountered during program execution. It remains in effect after execution.
Note: You also can paste Horiz or G-T to the home screen or program editor from the
CATALOG (Chapter 15).
To Next Page
Loading...
