Texas Instruments TI-84 Plus Guide Book

Chapter 9: Split Screen 213
Using Split Screen
Using Split ScreenUsing Split Screen
Using Split Screen
Setting a Split-Screen Mode
Setting a Split-Screen ModeSetting a Split-Screen Mode
Setting a Split-Screen Mode
To set a split-screen mode, press z, and then move the cursor to the next-to-last line
on the mode screen.
• Select
Horiz (horizontal) to display the graph screen and another screen split
horizontally.
• Select
G-T (graph-table) to display the graph screen and table screen split vertically.
The split screen is activated when you press any key that applies to either half of the split
screen.
$$

Texas Instruments TI-84 Plus Specifications

General

Battery type	AAA
Power source	Battery
Number of batteries supported	4
Type	Graphing
Cover	No
Form factor	Pocket
Control type	Buttons
Product color	Black
USB port	Yes
USB 2.0 ports quantity	1
Digits	- digits
Display number of lines	8 lines
Display number of characters	16
RAM capacity	0.024 MB
ROM capacity	0.480 MB
Storage media type	-