Texas Instruments TI-84 Plus Guide Book

Chapter 7: Tables 182
values also are displayed. All dependent-variable values may not be displayed if
Depend: Ask is selected.
Note: You can scroll back from the value entered for TblStart. As you scroll, TblStart is
updated automatically to the value shown on the top line of the table. In the example
above,
TblStart=0 and @Tbl=1 generates and displays values of X=0, …, 6; but you can
press } to scroll back and display the table for
X=M1, …, 5.
Displaying Other Dependent Variables
Displaying Other Dependent VariablesDisplaying Other Dependent Variables
Displaying Other Dependent Variables
If you have defined more than two dependent variables, the first two selected Y=
functions are displayed initially. Press ~ or | to display dependent variables defined by
other selected Y= functions. The independent variable always remains in the left column,
except during a trace with Par graphing mode and G-T split-screen mode set.

Texas Instruments TI-84 Plus Specifications

General

Battery type	AAA
Power source	Battery
Number of batteries supported	4
Type	Graphing
Cover	No
Form factor	Pocket
Control type	Buttons
Product color	Black
USB port	Yes
USB 2.0 ports quantity	1
Digits	- digits
Display number of lines	8 lines
Display number of characters	16
RAM capacity	0.024 MB
ROM capacity	0.480 MB
Storage media type	-